01400 Multifunctional glued tiles ORDEXAL OK for steel structure

Caution: these pages serve only for the first information about material for designers and investors, they are solved in one uniform chart and they don't pose pretentions on perfections. Other basis or details can be found out in our technical office. Data written in this list agree with by this time publicated data and obtained experience of J. SEIDL & spol., s.r.o. Supplier is not in charge of applications done out of frame here given tests and certifications - operations of fire fighting applications with product mentioned in this list without written authorisation of producer or author are prohibited.

Product Catalogue Sheet

Multifunctional glued tiles
ORDEXAL OK
for Steel Structures

A. Product Properties

The multifunctional system of glued tiles of the bearing structures based on plates from mineral felt, permanently anchored by elastic fire-resistant compound, or by metal joining elements. They are based on ORSIL PYRO plates and moulded bricks produced by pulping a mixture of basalt melt, blast-furnace cinder and diabase mixture and processed subsequently. The plates does not include any asbestos fibres.

Exterior: Without any additional surface finish, the lining is of light brown to grey-green colour, being with regular planning grid on the surface. The joints and connections are visibly cemented with a differently coloured compound. The lining surface without any additional paint is porous and rough.

Surface finish: The completed lining may, based on a special client's request be as for colours unified by usage of a special facade paint , delivered in the basic colour of white. Any othe colours according to the agreement and in compliance with producer's capacity. Alternatively, the lining may be finished with protecting facade with a reinforced net from glass fibres.

B. Application

The system is determined for fire protection of fire-resistant steel bearing structures due to ČSN 73 0810, ČSN 73 0802, ČSN 73 804 and to relating standards and they may be applied for obtaining the fire resistance OK between R15 and R180 DP1 due to the ČSN EN 13501-2+A1 and ČSN P ENV 13381-4.

The linings are suitable for:Industrial environments with industrial atmosphere up to degree IV and for any commonly either heated or non-heated interiors. The heating insulation of the construction (cold bridges) shall permanently be insulated by the lining , without causing any additional load through bearing elements, they shall remain without any cracks, and as for the construction under protection, the linings even withstand the vibrations and dynamic strokes .The lining with a surface finish may also be exposed in an exterior environment.

Plates are not suitable: Lining without any surface finish must not be exposed to any dripping or flowing water, maximally permitted rel. air humidity shall be of 85 per cent.

C. Certificates

• Certificate to AO 216 PAVUS No. 216/C5a/2010/0213 of 30.12.2010
• Building and Technical Certificate No. S-216/C5a/2010/0213 valid to 31.12.2013
• Records on Specification No. PK2-05-04-014-C-1 of 24.11.2010
• Records on Specification No. PK2-16-10-005-C-0 ze dne 20.12.2010
• Record No. 510 078 of 31.8.2010
• Declaration of Compliance due to the Act 22/1997 Coll.. and Order Vl no.163/2002 Coll..
• and a file of other records and evidence included in the Records on Certification

D. Delivery Terms:

The deliveries, including assembly, shall be executed by J.SEIDL & spol.,s.r.o. exclusively, where all further requirements may be stated, by or other firms that are in possession of the written J. Seidl & spol.,s.r.o. licence to apply all industrial rights as for the said solution.

E. Life

When commonly used as for the constructions due to par. B and with the presumption of observing the prescribed technological instructions, the lining meet the provisions set under § 47 par. 1 of the Building Act.

F. Antifire Technical Properties

The antifire ORDEXAL lining was with evidence tested by the PAVUS - Veselí n.L. ,an accredited Testing Agency and certified by the AO 216 Praha

Based on the said tests and records, the Records on Specification was compiled, where the obtained values of the fire resistance of the steel bearing bar elements dependent on the ratio of the coefficient of the diameter Am/V (m-1) were mentioned. As for the proposed temperature of 500°C, the values are given in the Table no. 1:

Further values for presumed temperatures between 350°C and 750°C are available based on request.

The Table no.2 presents the basic physical and mechanical and antifire technical properties of the lining plates in connection with their application

*) Measured on a roof trapese sheet of 0,8 mm with the lining thickness of 40 mm due to ČSN 73 0540:94 in accordance with P0 73010 ČSN EN ISO 8990

**) Measured on a reinforced concrete panel of 60 mm with the lining thickness of 40 mm due ČSN 73 0540:94 in accordance with P0 73010 ČSN EN ISO 8990

G. Terms for Application

The ORDEXAL lining system application shall always be bound with observation of the prescribed know-how and keeping the precise material composition in compliance with the samples tested by the PAVUS a.s. - Veselí nad Lužnicí testing agency as well as with valid certificates. Therefore, only the firms that may submit the written authorization, and were trained by J. Seidl & spol.,s.r.o., (being in possession of all industrial right to this application) may execute these applications. Should this condition be not fulfilled, then, the certificate, respectively the declaration of compliance, may not be applied for any executed work.

H. Specifications and Related Standards

ČSN series 73 08 02, 04, 10 and other des. norms, ČSN EN 1363-1, ČSN P ENV 13381-4, ČSN P ENV 1993-1-2, certificates, technical supporting documents and other documents from producers of the materials and concerning the firms, the services thereof, J. Seidl & spol.,s.r.o. used.

I. Consultancy Services for Designers

Technical Office, J.Seidl & spol.,s.r.o., Pražská 16, 102 21 Praha 10 - Hostivař, Ing. Petr Bohuslav, e-mail: bohuslav@seidl.cz; Eduard Vašátko, e-mail: seidl@comp.cz; , expert in the field "Materials for Fire Protection"